## Abstract Waterβswollen hydrogel (WSH) membranes for gas separation were prepared by the dipβcoating of asymmetric porous polyetherimide (PEI) membrane supports with poly(vinyl alcohol) (PVA)βglutaraldehyde (GA), followed by the crosslinking of the active layer by a solution method. Crosslinked P
Preparation of novel fluorinated block copolyimide membranes for gas separation
β Scribed by M. Niwa; S. Nagaoka; H. Kawakami
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 191 KB
- Volume
- 100
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A technique was developed to prepare defect-free, asymmetric, polymer membranes for gas separation. The preparation method eliminates the need for coatings, which are usually required to render asymmetric, polymer based, membranes gas selective. In this method, a casting solution containing a polyme
Interfacial polycondensed composite membranes are well known for reverse osmosis. This study describes the preparation of interfacial polymerized composite membranes for gas separation obtained from new polyamides. The polymers were synthesized by derivates of terephthaloylchloride and commercially
## Abstract Poly(phthalazinone ether sulfone ketone) (PPESK) asymmetric hollow fiber membranes for gas separation were prepared by dry/wet phase inversion technique. The effects of various preparation conditions such as solvent, nonsolventβadditives(NSA), PPESK concentration, and air gap on the mem
## Abstract Novel mixed matrix membranes were prepared by incorporating ZSMβ5 zeolite into chitosan polymer for the pervaporative separation of dimethyl carbonate (DMC) from methanol. These membranes were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (