✦ LIBER ✦

Preparation and properties of cross-linked sulfonated poly(arylene ether sulfone)/sulfonated polyimide blend membranes for fuel cell application

✍ Scribed by Huiping Bi; Jiali Wang; Shouwen Chen; Zhaoxia Hu; Zhilin Gao; Lianjun Wang; Ken-ichi Okamoto

Book ID: 108209437
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 901 KB
Volume: 350
Category: Article
ISSN: 0376-7388
DOI: 10.1016/j.memsci.2009.12.017

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation and properties of crosslinke

Preparation and properties of crosslinked multiblock sulfonated poly(arylene ether sulfone) membranes for fuel cell applications

✍ Xuan Zhang; Zhaoxia Hu; Sha Zhang; Shouwen Chen; Shanshan Chen; Jianmei Liu; Lia 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 638 KB

Novel multiblock poly(arylene ether sulfone)s were prepared by a two-pot method from a phenoxide-end-capped fully disulfonated poly(arylene ether sulfone) oligomer and a fluoride-end-capped nonsulfonated poly(arylene ether sulfone) oligomer with block length of 10 as the hydrophilic and hydrophobic

Modified Sulfonated Poly(arylene ether s

Modified Sulfonated Poly(arylene ether sulfone) Membranes Prepared via a Radiation Grafting Method for Fuel Cell Application

✍ Chi Hoon Park; Dong Won Shin; Young Moo Lee; Phil Hyun Kang; Young Chang Nho 📂 Article 📅 2009 🏛 The Polymer Society of Korea 🌐 English ⚖ 298 KB

Preparation and properties of novel cros

Preparation and properties of novel cross-linked sulfonated poly(arylene ether ketone) for direct methanol fuel cell application

✍ Yang Zhang; Ying Wan; Gang Zhang; Ke Shao; Chengji Zhao; Hongtao Li; Hui Na 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 729 KB

A series of cross-linkable sulfonated poly(arylene ether ketone)s bearing carboxylic acid groups (C-SPAEKs) have been prepared for direct methanol fuel cells (DMFCs). The chemical structure of the cross-linkable copolymers was analyzed by 1 H NMR and 13 C NMR spectra. Cross-linked membranes were obt

Modified sulfonated poly(arylene ether s

Modified sulfonated poly(arylene ether sulfone)-b-polybutadiene (SPAES-b-PB) membrane for fuel cell applications

✍ Xingpeng Zhang; Shengzhou Liu; Jie Yin 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 552 KB

Sulfonated poly(ether imide) and poly(et

Sulfonated poly(ether imide) and poly(ether sulfone) blends for direct methanol fuel cells. II. Membrane preparation and performance

✍ Yao-Chi Shu; Fu-Sheng Chuang; Wen-Chin Tsen; Jing-Dong Chow; Chunli Gong; Sheng 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 477 KB 👁 2 views

## Abstract This study describes the preparation and characterization of new ionomer blend membranes containing sulfonated poly(ether imide) (SPEI) and poly(ether sulfone) (PES). Thermogravimetric analysis indicated that the obtained blend membranes were more thermally stable than the parent SPEI.

Preparation and properties of bisphenol

Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

✍ Ni Zhang; Junjing Li; Xiangyu Wang; Zhi Xia; Huiling Liu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 351 KB 👁 2 views

## Abstract Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirme