Preparation and properties of novel cross-linked sulfonated poly(arylene ether ketone) for direct methanol fuel cell application
โ Scribed by Yang Zhang; Ying Wan; Gang Zhang; Ke Shao; Chengji Zhao; Hongtao Li; Hui Na
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 729 KB
- Volume
- 348
- Category
- Article
- ISSN
- 0376-7388
No coin nor oath required. For personal study only.
โฆ Synopsis
A series of cross-linkable sulfonated poly(arylene ether ketone)s bearing carboxylic acid groups (C-SPAEKs) have been prepared for direct methanol fuel cells (DMFCs). The chemical structure of the cross-linkable copolymers was analyzed by 1 H NMR and 13 C NMR spectra. Cross-linked membranes were obtained by thermal curing cross-linkable copolymers. The cross-linked network structure caused significant enhancement in the mechanical properties and large reduction in water uptake (WU), swelling ratio and methanol permeability of the membranes. The water uptake and methanol permeability of C-SPAEK-50 membrane was 506.9% (80 โข C) and 14.83 ร 10 -7 cm 2 /s, but after cross-linking they reduced to 75.2% and 1.74 ร 10 -7 cm 2 /s, while maintaining proton conductivity of 0.197 S/cm, which was higher than 0.146 S/cm of Nafion 117.
๐ SIMILAR VOLUMES
## Abstract Novel bisphenol Aโbased sulfonated poly(arylene ether sulfone) (bi AโSPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3โฒโdisulfonateโ4,4โฒโdichlorodiphenylsulfone, 4,4โฒโdichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirme
Novel side-chain-type sulfonated poly(arylene ether ketone) with pendant sulfoalkyl groups (SPAEK-xx) were synthesized by post-sulfonation method. Their structures were confirmed by FT-IR and NMR spectra. The all obtained membranes had excellent thermal stability and mechanical properties. The sidec
Novel multiblock poly(arylene ether sulfone)s were prepared by a two-pot method from a phenoxide-end-capped fully disulfonated poly(arylene ether sulfone) oligomer and a fluoride-end-capped nonsulfonated poly(arylene ether sulfone) oligomer with block length of 10 as the hydrophilic and hydrophobic