In this study, packed capillary columns were prepared using supercritical carbon dioxide as a packing carrier. A factorial design was used to examine the effect that four selected factors have on the packing performance. The investigated . . . factors were: 1 packing pressure, 2 carbon dioxide flow
Preparation and evaluation of supercritical carbon dioxide-packed capillary columns for HPLC and SFC
β Scribed by Daixin Tong; Keith D. Bartle; Anthony A. Clifford
- Publisher
- John Wiley and Sons
- Year
- 1994
- Tongue
- English
- Weight
- 537 KB
- Volume
- 6
- Category
- Article
- ISSN
- 1040-7685
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Preparation of packed capillary columns with supercritical carbon dioxide as the packing carrier is demonstrated; column performance was evaluated by both HPLC and SFC. It is shown that this procedure yields excellent column performance. The density of the packed bed can be controlled by varying the restrictor dimensions and the packing pressure. Column preparation using a supercritical fluid is more rapid than with liquid slurry packing and yields good column stability. Because supercritical fluids have a wider range of viscosities and velocities, in comparison with gases and liquids, a wide choice of packing conditions is available. Several applications of columns packed by this method are presented.
π SIMILAR VOLUMES
## Abstract A new, reproducible method is described for the preparation of highly efficient fused silica packed capillary columns using pressure programmed liquid or supercritical carbon dioxide to carry the packing material into the capillary. The method allows facile preparation of long, uniforml
## Abstract A modified procedure for the preparation of packed capillary columns by the use of supercritical or liquid carbon dioxide slurries is proposed. This technique removes the problems arising from sudden and rapid movement of sorbent suspension at the beginning of the filling process. The p
Fritless packed silica gel columns were prepared using sol-gel technology. A part of a 75 lm i.d. fused silica capillary was filled with a mixture of tetramethoxysilane and poly(ethylene glycol). After gelling at 40 8C and heating at 300 8C, the resultant silica gel was derivatized with dimethylocta