Preparation and characterization of activated carbon from a low rank coal
β Scribed by Tanzil Haider Usmani; Tamoor Wahab Ahmed; S.Zafar Ahmed; A.H.K. Yousufzai
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 534 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
β¦ Synopsis
Powdered activated carbon has been prepared from lignitic coal of Lakhra (Pakistan) by a chemical activation method using ZnCl, as an activating agent. Different process variables have been established after a series of experiments and an impregnation ratio of 1: 2, an activation temperature of 650Β°C and a duration of 1 hour have been found to be appropriate for its preparation. It has been found
that the char is obtained in high yield with iodine and methylene blue numbers of 990 and 205, respectively. Different parameters based on adsorption of benzene at 293 K under reduced pressure have been calculated using DR equation with micropore volume W,=O.46 cm3/g, an average pore width L= 0.98 nm and a microporous surface area S,, = 942 m2/g. The nonporous surface area S, calculated by the t/F method is 142 m'/g. FTIR spectra of this sample show the presence of acidic functional carboxylic groups developed on its surface after activation. Their predominance is further confirmed by neutralization with different alkalis.
π SIMILAR VOLUMES
A series of activated carbons was prepared from bituminous coal by chemical activation with potassium hydroxide and zinc chloride and also by physical activation with carbon dioxide. The effect of process variables such as carbonization time, temperature, particle size, chemical agents, method of mi
Activated carbon was prepared by physical activation in CO, from a low-ash subbituminous coal. The preparation process consisted of carbonization of the coal in N, followed by activation of the resulting chars in CO,. The activation temperature ranged from 700 to 950Β°C. Experimental results revealed
Devolatilization of an Illinois-basin coal was carried out under a nitrogen atmosphere in the temperature range 600 to 900Β°C. A vertical heated-wall fixed-bed furnace reactor was used. Char produced was activated in the presence and absence of steam using the same furnace setup. The surface area of
Olive stones have been carbonized under a flow of nitogen in the temperature range from 700 to 900Β°C and activated in a CO2 flow in the range from 675 to 875Β°C. ZnCI, was used in some of the activation processes. The adsoptive characteristics of the carbonized and activated samples have been determ