𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation and characterization of a novel porous titanium scaffold with 3D hierarchical porous structures

✍ Scribed by Yuejun Chen; Bo Feng; Yaping Zhu; Jie Weng; Jianxin Wang; Xiong Lu

Book ID
106400632
Publisher
Springer
Year
2011
Tongue
English
Weight
381 KB
Volume
22
Category
Article
ISSN
0957-4530

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Preparation of 3D Fibroin/Chitosan Blend
Preparation of 3D Fibroin/Chitosan Blend Porous Scaffold for Tissue Engineering Via a Simplified Method
✍ Yuhui Ruan; Hong Lin; Jinrong Yao; Zhengrong Chen; Zhengzhong Shao πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 705 KB

## Abstract In this work, we developed a simple and flexible method to manufacture a 3D porous scaffold based on the blend of regenerated silk fibroin (RSF) and chitosan (CS). No crosslinker or other toxic reagents were used in this method. The pores of resulted 3D scaffolds were connected with eac

A novel porous bioceramics scaffold by a
A novel porous bioceramics scaffold by accumulating hydroxyapatite spherules for large bone tissue engineering in vivo. I. Preparation and characterization of scaffold
✍ Qian Peng; Faxing Jiang; Peng Huang; Shaobing Zhou; Jie Weng; Chongyun Bao; Cong πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 714 KB

## Abstract A novel scaffold with large dimension of 3–4 cm in length and 1–1.5 cm in diameter was designed and fabricated for engineering large bone tissue __in vivo__. The scaffold was constructed by filling hydroxyapatite (HA) spherules into a porous HA tube. The HA spherules were prepared by ch

Development and characterization of a po
Development and characterization of a porous poly(methyl methacrylate) scaffold with controllable modulus and permeability
✍ Daniel A. Shimko; Eric A. Nauman πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 687 KB

## Abstract Functional restoration following extensive bone injury often requires bone grafting. The primary source of graft material is either autograft or allograft. The use of both material sources is well established, however both suffer limitations. In response, grafting alternatives are being