Preconcentration of an analyte dialysate in a flow-injection system
β Scribed by J.F. van Staden; C.J. Hattingh
- Publisher
- Elsevier Science
- Year
- 1995
- Tongue
- English
- Weight
- 738 KB
- Volume
- 308
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
β¦ Synopsis
Preconcentration of an analyte dialysate was studied in a flow-injection system where hyphenation of the dialysis/preconcentration was done on-line. The dependence of the combined dialysis/preconcentration process on a number of variables was evaluated and optimised. As timing played a very important role in the whole system, a time regulated system from a computer was employed to control various functions of the system. The system was applied to the determination of copper in food supplements containing vitamin-mineral conditioners for dogs and cats. Suitable results were obtained from a calibration curve between 0.5 and 5 mg/l of soluble copper with a detection limit of 0.295 mg/l. The values obtained by the hyphenated dialysis/preconcentration/FIA system compared favourably with the standard manual atomic absorption spectrometric method and the value of 0.05% (m/m> given by the producers. A relative standard deviation of 5.74% was obtained.
π SIMILAR VOLUMES
A method is described for the determination of tryptophan in which it reacts with cerium(IV) in 0.15 M sulphuric acid. The method is rapid and precise and solutions can be analysed at a rate of 211 h-i with a relative standard deviation of ca. 0.45% at 12.5 pg ml-' and a limit of detection of 0.1 pg
A simple, fast and reliable method, with a low detection limit, has been developed for the determination of total mercury in saliva samples. The method uses a brominating reagent, followed by on-line addition of KMnO, at room temperature to convert organically bound mercury to inorganic mercury ions