✦ LIBER ✦

Post spinning and pyrolysis processes of polyacrylonitrile (PAN)-based carbon fiber and activated carbon fiber: A review

✍ Scribed by N. Yusof; A.F. Ismail

Book ID: 113664997
Publisher: Elsevier Science
Year: 2012
Tongue: English
Weight: 678 KB
Volume: 93
Category: Article
ISSN: 0165-2370
DOI: 10.1016/j.jaap.2011.10.001

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Adsorption properties of polyacrylonitri

Adsorption properties of polyacrylonitrile-based activated carbon hollow fiber

✍ Junfen Sun; Guangxiang Wu; Qingrui Wang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 121 KB 👁 2 views

## Abstract In this work, polyacrylonitrile (PAN) hollow fibers are pretreated with ammonium dibasic phosphate and then further oxidized in air, carbonized in nitrogen, and activated with carbon dioxide. The adsorption properties of the resultant activated carbon hollow fibers (ACHF) prepared in di

Surface chemistry of polyacrylonitrile-

Surface chemistry of polyacrylonitrile- and rayon-based activated carbon fibers after post-heat treatment

✍ Yu-Chun Chiang; Chen-Yueh Lee; Hung-Chih Lee 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 713 KB

Preparation and characterization of PAN-

Preparation and characterization of PAN-based ultra-fine activated carbon fiber adsorbent

✍ Yu Yang; Zhou Mei-Hua; Xue Gang; Jiang Zheng-Xiong 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 605 KB

Effect of post-spinning modification on

Effect of post-spinning modification on the PAN precursors and resulting carbon fibers

✍ Zhang Wangxi; Liu Jie 📂 Article 📅 2006 🏛 Wuhan University of Technology 🌐 English ⚖ 690 KB

Preparation and characterization of anti

Preparation and characterization of antibacterial polyacrylonitrile-based activated carbon fiber supporting Nano-ZnO

✍ Li, Quan-ming 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 704 KB

Influence of activation temperature on t

Influence of activation temperature on the properties of polyacrylonitrile-based activated carbon hollow fiber

✍ M.-C. Yang; D.-G. Yu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 2 views

In this work, polyacrylonitrile hollow fiber was oxidized, carbonized, and activated by carbon dioxide into activated hollow carbon fiber. The effects of the activation temperature on the characteristics of the resulting activated hollow carbon fiber, including the mechanical properties, the surface