Post silanization improves bond strength of translucent posts to flowable composite resins

✍ Scribed by Alberto Albaladejo; Raquel Osorio; Federica Papacchini; Cecilia Goracci; Manuel Toledano; Marco Ferrari

• Publisher: John Wiley and Sons
• Year: 2007
• Tongue: English
• Weight: 143 KB
• Volume: 82B
• Category: Article
• ISSN: 1552-4973
• DOI: 10.1002/jbm.b.30736

✦ Synopsis

Abstract

The aim of the study is to evaluate the effect of post silanization on the microtensile bond strength (MTBS) of translucent fiber posts to seven flowable composite resins used as core material. Seventy fiber posts were employed. In half of the posts, silanization was performed with Monobond‐S. A cylindrical plastic matrix was placed around the post and filled with different resins: UniFil Flow Experimental, UniFil Low Flow Plus Experimental, Venus Flow, Revolution Formula 2, Point 4 Flowable, X‐Flow, and Wave mv. Five posts were bonded per group. After polymerization, two longitudinal cuts were made on two opposite sides of the post at its outermost periphery. Then, each specimen was serially sectioned, obtaining 30–35 beams with 1‐mm^2^ cross‐sectional area. Each beam was tested in tension in an Instron machine at 0.5 mm/min. ANOVA and Student Newman Keuls tests were performed. The different resin composite materials and the post silanization procedure had a significant effect on MTBS. The application of a silane coupling agent increased MTBS of flowable composite resins to translucent posts. X‐flow and Point 4 attained the highest MTBS regardless of the silane treatment. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2007