𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Polymerization studies using modified Ziegler-Natta catalysts: 2. Polymerization of vinyl fluoride

✍ Scribed by R.N. Haszeldine; T.G. Hyde; P.J.T. Tait

Publisher
Elsevier Science
Year
1973
Tongue
English
Weight
290 KB
Volume
14
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Polymerization of 2-allylnorbornane usin
Polymerization of 2-allylnorbornane using Ziegler-Natta catalysts: Homopolymerization
✍ Sujata Marathe; Thekke Pangil Mohandas; Swaminathan Sivaram 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 545 KB

## Abstract Polymerization of 2‐allylnorbornane using TiCl~4~ catalyst results in a polymer which is 40% insoluble in __o__‐xylene at 130°C, whereas with TiCl~3~ catalyst, a polymer with 88% insolubility in __o__‐xylene at 130°C is obtained. The __o__‐xylene‐insoluble fractions gave a very high mel

Propene polymerization using ziegler-nat
Propene polymerization using ziegler-natta catalyst supported on modified magnesium oxide
✍ N. Tatizawa; R. Quijada 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 352 KB

Studies on the use of magnesium oxide modified by sodium pyrophosphate, used as a support for TIC14, are described. Support characterization was made using X-ray diffraction, BET and porosimetric methods. Two different periods of time were investigated for impregnation of the support with TIC14; the

Polymerization of propylene using a prep
Polymerization of propylene using a prepolymerized high-active Ziegler–Natta catalyst. I. Kinetic studies
✍ R. Kahraman; M. Erdoǧan; T. Bilgiç 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 651 KB

The kinetics of propylene polymerization using a prepolymerized high-active T i c & catalyst with an EtzAICl cocatalyst are investigated. The effect of various parameters such as Al/ T i ratio, pressure, temperature, hydrogen, and polymerization time on the rate of polymerization and yield are exami