The e β ect of prepolymer structure on the electro-optic properties of polymer dispersed liquid crystals (PDLCs) prepared from UV-cured polyurethane acrylates (PUAs) has been studied. Among four types of Γlms with di β erent soft-segment structure, polypropylene glycol (PPG)-and polytetramethyl ether
Polyethylene dispersions in bitumen: The effects of the polymer structural parameters
β Scribed by Ali Akbar Yousefi
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 331 KB
- Volume
- 90
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Poly(2-hydroxyethyl methacrylate) particles in the micron size range were obtained by the dispersion polymerization. Cellulose acetate butyrate and dibenzoyl peroxide were used as steric stabilizer and initiator, respectively. The ultimate particle size could be adjusted by the selection of a suitab
## Abstract Band structure for the T, TG, G and TGTG' conformations of polyethylene are computed in the framework of the extended HΓΌckel method. Significant changes of the Cο£ΏC bands are observed in the density of states and could in principle be detected by an XPS experiment.
Nonporous hydrogel microspheres 0.1-1.3 m in diameter were prepared by the dispersion copolymerization of 1-vinyl-2-pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state 13 C NMR and elemental analysis. The effect of various parameters includi
## Abstract The influence of zone drawing on bulk properties and structure of metallocene polyethylene (__m__βPE) is reported. Two different __m__βPE materials were subjected to tensile stresses above the yield point by zone drawing in the temperature range from 50 to 100Β°C. Drawn materials were ch
## Abstract Polymer modified bitumen (PMB) is a binder obtained by the incorporation of polymer into the bitumen by mechanical mixing or chemical reaction. This study deals with the modification of bitumen with three types of polymers (LDPE, EVA, and SBS) in the presence of filler (CaCO~3~). The mo