Polyaniline-supported acid catalyst: Esterification of cinnamic acid with alcohols
✍ Scribed by Srinivasan Palaniappan; Malladi Sairam
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 106 KB
- Volume
- 96
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Polyaniline‐supported acid salts such as polyaniline‐hydrochloride, polyaniline‐sulfate, and polyaniline‐nitrate were prepared by oxidation of aniline using benzoyl peroxide and ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalysts in the esterification of cinnamic acid with alcohols. Polyaniline‐sulfate salt was found to be the best catalyst for the esterification of cinnamic acid. The reusability, handling, and recovery of the catalyst were found to be good. The yield of the ester depended on the type of the polyaniline salt, amount of the catalyst, amount of alcohol, and both the time and the temperature of the reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1584–1590, 2005
📜 SIMILAR VOLUMES
## Abstract The esterification of cinnamic acid (CA) and oleyl alcohol (OA) in organic solvent media by immobilized lipase Novozym 435 was optimized in terms of selected parameters, including the logarithm of the 1‐octanol/water partition coefficient of the organic solvent (log __P__, 0.29–4.5), in
## Abstract Ferric oxide has been found to promote both the ketonization of acetic acid and its esterification with methyl alcohol, isopropyl alcohol, and benzyl alcohol. The competitive kinetic technique, where the esterification reaction is made to compete with the ketonization of acetic acid, ha
## Abstract For Abstract see ChemInform Abstract in Full Text.
Kinetics of the sulfuric acid catalyzed esterification of palmitic acid with isobutyl alcohol has been studied and reviewed critically. A theoretical rate equation is derived by the following reaction mechanism: (1) The reaction of sulfuric acid and isobutyl alcohol produces isobutyl sulfuric acid w
## Abstract Different ratios of phosphotungestic acid supported on silica gel were prepared by an impregnation method with PWA loadings ranging from 1 to 30% w/w and calcined at 350 and 500 °C for 4 h in a static air atmosphere. The catalysts were characterized by thermogravimety (TG), differential