𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Plastic-bonded electrodes for nickel—cadmium accumulators IV. Some specific problems of the positive active layer

✍ Scribed by K. Micka; J. Mrha; B. Klápště

Book ID
108004751
Publisher
Elsevier Science
Year
1980
Tongue
English
Weight
512 KB
Volume
5
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Plastic-bonded electrodes for nickel—cad
Plastic-bonded electrodes for nickel—cadmium accumulators: VII. Influence of different metal screens on the oxygen recombination rate on plastic-bonded cadmium electrodes
✍ J. Jindra; J. Mrha; M. Musilová; M. Polydorová; J. Peizker 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 431 KB

The oxygen recombination (reduction) rate on plastic-bonded cadmium electrodes in sealed Ni-Cd systems can be increased by using metal screens applied to the gas side of the plastic-bonded cadmium electrode. The metal screen applied should have an optimum geometry (mesh size, wire diameter) to prov

Plastic bonded electrodes for nickel-cad
Plastic bonded electrodes for nickel-cadmium accumulators II. Basic electrochemical parameters of the nickel oxide electrode
✍ J. Mrha; I. Krejčí; Z. Zábranský; V. Koudelka; J. Malík 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 780 KB

Plastic bonded nickel oxide electrodes, prepared at normal temperature by one-stage rolling onto a current collector of steel net or perforated sheet of a mixture of active mass used in pocket-type electrodes, a conducting component and a PTFE binder, were tested in alkaline electrolyte. At current

Plastic-bonded electrodes for nickel—cad
Plastic-bonded electrodes for nickel—cadmium accumulators: X. The nature of the second discharge step of nickel oxide electrodes
✍ B. Klápště; K. Micka; J. Mrha; J. Vondrák 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 431 KB

The second discharge step of nickel oxide accumulator electrodes is suppressed in the presence of a Teflon binder and/or cobalt, cerium, or manganese hydroxide, whereas the first discharge step increases. This behaviour is discussed in terms of ohmic resistance effects and semiconducting properties