✦ LIBER ✦

Plasma sprayed contact materials for vacuum interrupters

✍ Scribed by Schellekens, H.; Shang, W.; Lenstra, K.

Book ID: 117862232
Publisher: IEEE
Year: 1993
Tongue: English
Weight: 552 KB
Volume: 21
Category: Article
ISSN: 0093-3813
DOI: 10.1109/27.249625

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Vacuum interrupter contacts and process

Vacuum interrupter contacts and process for producing the same

📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 88 KB

Contact materials for vacuum switching d

Contact materials for vacuum switching devices

✍ Heitzinger, F.; Kippenberg, H.; Saeger, K.E.; Schroder, K.-H. 📂 Article 📅 1993 🏛 IEEE 🌐 English ⚖ 864 KB

Spray pyrolysis of electrolyte interlaye

Spray pyrolysis of electrolyte interlayers for vacuum plasma-sprayed SOFC

✍ Andreas O. Stoermer; Jennifer L.M. Rupp; Ludwig J. Gauckler 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 867 KB

Vacuum- Plasma- Sprayed titanium- mangan

Vacuum- Plasma- Sprayed titanium- manganese electrode layers for MnO2deposition

✍ H. D. Steffens; M. Brune 📂 Article 📅 1995 🏛 Springer US 🌐 English ⚖ 973 KB

Failure behaviors of vacuum plasma spray

Failure behaviors of vacuum plasma sprayed tungsten coatings for plasma facing application

✍ F.L. Chong; J.L. Chen; J.G. Li; X.B. Zheng 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 575 KB

Mechanical and technological properties

Mechanical and technological properties of vacuum plasma sprayed and hot isostatically pressed Composite materials

✍ Prof. Dr.-Ing. H.-D. Steffens; Mrs. Dr. rer. nat. J. Lebküchner-Neugebauer; Dipl 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 632 KB

## Abstract Ti/NiCr20TiAl and NiCoCrALY/IN617 composite materials have been produced by vacuum plasma spraying, Arc‐PVD and hot isostatic pressing. Regarding their mechanical and technological properties they are dependent on the heat treatment during the production process. Therefore optimized str