𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Physical property retention of PC/ABS blends

✍ Scribed by Joseph Kuczynski; Randy W. Snyder; Peter P. Podolak

Publisher
Elsevier Science
Year
1994
Tongue
English
Weight
980 KB
Volume
43
Category
Article
ISSN
0141-3910

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Recycling of ABS and ABS/PC blends
Recycling of ABS and ABS/PC blends
✍ Xiaodong Liu; Hans Bertilsson πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 141 KB πŸ‘ 2 views

The aim of this work within the framework of mechanical recycling of polymers is upgrading recycled engineering plastics by means of a blending technique. Four different plastics from dismantled Volvo cars have been investigated. They are poly(acrylonitrile-butadiene-styrene) (ABS) and ABS-polycarbo

Effects of processing conditions on the
Effects of processing conditions on the phase morphology of PC/ABS polymer blends
✍ B. I. Chaudhry; E. Hage; L. A. Pessan πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 517 KB

The phase morphology of PC/ABS blends can be significantly affected by its processing conditions. Blends prepared in a mixing chamber at different conditions show a strong influence of mixing time and temperature on its morphology. The blend morphology changes from a well-dispersed PC phase surround

Effect of ABS Rubber Content on the Loca
Effect of ABS Rubber Content on the Localization of MWCNTs in PC/ABS Blends and Electrical Resistivity of the Composites
✍ Yao Sun; Zhao-Xia Guo; Jian Yu πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 375 KB

## Abstract Three types of acrylonitrile‐butadiene‐styrene rubbers with different rubber contents were used in the preparation of PC/ABS/MWCNT composites. It was found that localization of MWCNTs changes from PC to ABS phase when rubber content of ABS varies from 5 to 60%. This is discussed by a co