𝔖 Bobbio Scriptorium
✦   LIBER   ✦

PH—Postharvest Technology: Airflow Resistance of Paddy and its Byproducts

✍ Scribed by K. Nalladurai; K. Alagusundaram; P. Gayathri


Publisher
Elsevier Science
Year
2002
Tongue
English
Weight
217 KB
Volume
83
Category
Article
ISSN
1537-5110

No coin nor oath required. For personal study only.

✦ Synopsis


Designers of grain cooling and drying systems require data on airflow resistance of grains and oilseeds for the accurate selection of fans, for assessment of filling depths in storage bins, and mathematical prediction of pressure and airflow patterns in the stored mass. An experimental study was performed to determine the resistance to airflow (expressed as pressure drop per unit depth of bed for a known airflow rate) of paddy and its byproducts. Effects of the parameters such as moisture content, airflow rate, direction of airflow (both vertical and horizontal) and fines and chaff content on the resistance to airflow were studied.

The resistance to airflow of paddy increased with an increase in fines and chaff content and a decrease in moisture content. The pressure drops developed by the three paddy varieties tested, were different at the same airflow rates because of differences in physical dimensions and properties among them. The highest pressure drop was observed in broken grains and the lowest in parboiled paddy than the other paddy constituents like raw paddy, raw rice and parboiled rice. The resistance to airflow of paddy and its byproducts in the horizontal direction was 0Á19-0Á31 times the resistance to airflow in the vertical direction.


📜 SIMILAR VOLUMES


PH—Postharvest Technology: Airflow Resis
✍ P.M. Nimkar; P.K. Chattopadhyay 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 164 KB

Pressure drops were measured in clean green gram beds at moisture content in a range of 8Á36-16Á65% d.b. for superficial air velocities which ranged between 0Á0104 and 1Á0875 m 3 s À1 m À2 at bed depths of 0Á2 to 0Á6 m with bulk density ranging from 760 to 855 kg m À3 . The airflow resistance of gre

PH—Postharvest Technology: Performance A
✍ D. Shitanda; Y. Nishiyama; S. Koide 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 412 KB

Some physical and mechanical properties of three varieties of rice namely; Akitakomachi (short grain), Delta and L201 (long grain) were determined and used in the performance analysis of an impeller husker. Grain motion on the blade was observed at the rated impeller speed of 2362 min\ using a high-

PH—Postharvest Technology: Numerical Sim
✍ E. Sakaguchi; M. Suzuki; J.F. Favier; S. Kawakami 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 486 KB

Shaking separation of paddy and brown rice is investigated using a numerical model and by experiment at the same scale. The numerical model employs the discrete element method with two-dimensional circular particles representing rice grains. The indents on the experimental separation plate were mode