## Abstract Chemically selective solid state phosphorus‐31 nuclear magnetic resonance (NMR) imaging of the mineral phase of bone and synthetic calcium phosphate models for bone mineral is demonstrated with microscopy‐scale (about 5 mm field of view) apparatus at 6.0 T magnetic field strength. Pixel
Phosphorus-31 magnetic resonance imaging of hydroxyapatite: A model for bone imaging
✍ Scribed by Jerome L. Ackerman; Daniel P. Raleigh; Melvin J. Glimcher
- Publisher
- John Wiley and Sons
- Year
- 1992
- Tongue
- English
- Weight
- 731 KB
- Volume
- 25
- Category
- Article
- ISSN
- 0740-3194
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
One‐dimensional ^31^P nuclear magnetic resonance images (projections) of syntheticcalcium hydroxyapatite, Ca~10~(OH)~2~(PO~4~)~6~, have been obtained for samples on the order of 0.5 to 1.0 cm in linear extent at 7.4 T magnetic field strength. Because of the solid state nature of these samples, short ^31^P spin‐spin relaxation times under 1 ms occur, necessitating echo times of 1 ms and phase‐encoding magnetic field gradient pukesshorter than 500 μs. Optimal projection quality and shortest acquisition times result from pulsedgradient phase‐encoding of the spatial dimension, using a compensating gradient pulse to cancel the distorting effects of gradient waveform transients. The exceedingly long ^31^P spin‐lattice relaxation times could lead to potentially intolerable image acquisition times; these have been reduced with a flipback pulse technique. In addition to holding great potential as a novel research tool in the study of biomineralization of those organisms containing calcium phosphate solid phases, these methods should be of general utility in the multinuclear imaging of a wide variety of solids of interest in biophysics and materials science.
📜 SIMILAR VOLUMES
## Abstract ## Purpose: To develop a signal‐inducing bone cement for musculoskeletal procedures in magnetic resonance imaging (MRI). ## Materials and Methods: Acrylic resins were mixed with contrast agents (CAs) and water. We determined the ideal concentration of the components and assessed feas
Micro-magnetic resonance imaging (micro-MRI) is potentially a widely available tool to image and quantify the three-dimensional structure of trabecular bone. However, it has not been demonstrated that the same quantitative measurements can be obtained using micro-MRI as would be obtained from conven
In this study, we describe a method for imaging intracerebral electrodes within a threedimensional reconstructed image of the brain. A three-dimensional image of the brain was reconstructed from serial magnetic resonance images. The locations of intracerebral electrodes were determined from anterior