𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Performance of optical fibers for transmission of high-peak-power XeCl excimer laser pulses

✍ Scribed by R.F. Delmdahl; G. Spiecker; H. Dietz; M. Rütting; G. Hillrichs; K.-F. Klein

Publisher
Springer
Year
2003
Tongue
English
Weight
729 KB
Volume
77
Category
Article
ISSN
0721-7269

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design and performance of an excimer-las
Design and performance of an excimer-laser based optical system for high precision microstructuring
✍ K.-H. Gerlach; J. Jersch; K. Dickmann; L.J. Hildenhagen 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 866 KB

We report on the design of an excimer-laser based system for high precision micromachining of spinnerets using a mask imaging technique. Both the illumination and imaging unit are optimized for specified demagnification ratios of 5 and 15, respectively. Detailed investigations were performed to meas

Effect of force on ablation depth for a
Effect of force on ablation depth for a XeCl excimer laser beam delivered by an optical fiber in contact with arterial tissue under saline
✍ Geert H. M. Gijsbers; Duco G. van den Broecke; René L. H. Sprangers; Martin J. C 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 799 KB

## Abstract The effect of force applied to a 430 üm single fiber, delivering 60 pulses of 308 nm XeC1 laser radiation at 20 Hz, on the ablation depth in porcine aortic tissue under saline has been investigated. Energy densities of 8,15,25, 28, 31, 37, and 45 mJ/mm^2^ were used. Force was applied by