Partially Sulfonated Polystyrene and Poly(2,6-dimethyl-1,4-phenylene oxide) Blend Membranes for Fuel Cells
✍ Scribed by Bokyung Kim; Bumsuk Jung
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 123 KB
- Volume
- 25
- Category
- Article
- ISSN
- 1022-1336
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Summary: Based on Flory–Huggins parameters (χ), the miscibility and the effect of morphological change on proton conductivity and methanol permeability of partially sulfonated polystyrene (SPS) and partially sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO), having an identical ion exchange capacity, were investigated. When 50 wt.‐% of SPPO was blended, both the proton conductivity and methanol permeability had the highest values, which resulted from the change of amorphous domains and the hydrogen bonding between the two ionomers.
The proton conductivities, water uptake and methanol permeability for the SPPO/SPS blend membranes studied here. The membranes with 50 wt.‐% SPPO clearly showed the greatest increase in these properties.
imageThe proton conductivities, water uptake and methanol permeability for the SPPO/SPS blend membranes studied here. The membranes with 50 wt.‐% SPPO clearly showed the greatest increase in these properties.
📜 SIMILAR VOLUMES
Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T
## Abstract New ion‐exchange acid/base‐blend (SPPO/PBI) membranes were prepared by mixing __N,N__‐dimethylacetamide (DMA) solutions of sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) in the ammonium form and of polybenzimidazole (PBI), casting the solution as a thin film, evaporating the s
Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular