𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Ion-exchange membranes prepared by blending sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) with polybenzimidazole

✍ Scribed by Barbara Kosmala; Jan Schauer


Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
171 KB
Volume
85
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

New ion‐exchange acid/base‐blend (SPPO/PBI) membranes were prepared by mixing N,N‐dimethylacetamide (DMA) solutions of sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) in the ammonium form and of polybenzimidazole (PBI), casting the solution as a thin film, evaporating the solvent, and treating the membrane with aqueous hydrochloric acid. The resulting membranes were found insoluble in DMA. The preliminary tests of the membranes were carried out in an H~2~/O~2~ fuel cell at room temperature. Their performance in the fuel cell increased with the increase in the concentration of SPPO sulfonic acid groups in the blend, but the membranes formed with the highly sulfonated SPPO alone or predominanting, which swelled excessively in water, did not give reproducible results, and their performance was usually inferior to that of the membranes having an optimum ratio of both components. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1118–1127, 2002


📜 SIMILAR VOLUMES


The preparation of microporous membranes
✍ Jan Schauer; Wolfgang Albrecht; Thomas Weigel 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 301 KB 👁 1 views

Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T

Blends of SBS triblock copolymer with po
✍ Francesco Picchioni; Emanuele Casentini; Elisa Passaglia; Giacomo Ruggeri 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 205 KB 👁 1 views

## Abstract Blends of styrene–butadiene–styrene (SBS) or styrene–ethylene/1‐butene–styrene (SEBS) triblock copolymers with a commercial mixture of polystyrene (PS) and poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) were prepared in the melt at different temperatures according to the chemical kind of