𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Miscibility and thermal properties of blends of polystyrene with poly(5-benzoyl-2,6-dimethyl-1,4-phenylene oxide) or poly(5-acetyl-2,6-dimethyl-1,4-phenylene oxide)

✍ Scribed by Gue-Hyun Kim; Hack-Gi Shin; Won-Jei Cho; Chang-Sik Ha


Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
148 KB
Volume
86
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


The preparation of microporous membranes
✍ Jan Schauer; Wolfgang Albrecht; Thomas Weigel 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 301 KB 👁 1 views

Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T

Carboxylation of poly(2,6-dimethyl-1,4-p
✍ Shishan Xie; W. J. Macknight; F. E. Karasz 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB 👁 1 views

## Carboxyla tion of Poly(2,tk?imethyl-l,4Phenylene Oxide) and Thermal Properties of Blends with Atactic Polystyrene Poly(2,6-dimethyl-l,4phenylene oxide) (PPO) and atactic polystyrene (PSI form one of the best-known examples of thermodynamically miscible polymer blends. Thus a single, composition

Thermal oxidation and photo-oxidation of
✍ P. G. Kelleher; L. B. Jassie; B. D. Gesner 📂 Article 📅 1967 🏛 John Wiley and Sons 🌐 English ⚖ 309 KB

The thermal oxidation and photo-oxidation of poly(2,6-dimethyl-l,4phenylene oxide) have been examined. Oxidation of the plastic results in the evolution of carbon dioxide, nitrogen and traces of hydrogen, the introduction of considerable crosslinking, and increased absorption in the hydroxyl and car

High-resolution thermogravimetry of poly
✍ Xin-Gui Li 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 192 KB 👁 1 views

The thermal degradation and kinetics of poly(2,6-dimethylphenylene oxide) (PPO) were studied by high-resolution thermogravimetry. The thermogravimetry measurements were conducted at an initial heating rate of 50°C min Ϫ1 , resolution 4.0, and sensitivity 1.0 in both nitrogen and air from room temper

Blends of SBS triblock copolymer with po
✍ Francesco Picchioni; Emanuele Casentini; Elisa Passaglia; Giacomo Ruggeri 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 205 KB

## Abstract Blends of styrene–butadiene–styrene (SBS) or styrene–ethylene/1‐butene–styrene (SEBS) triblock copolymers with a commercial mixture of polystyrene (PS) and poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) were prepared in the melt at different temperatures according to the chemical kind of