𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Parametric analysis of a band-rejection antenna for UWB application

✍ Scribed by Jaehoon Choi; Kyungho Chung; Yangwoon Roh


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
147 KB
Volume
47
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


A compact and wideband microstrip-fed printed monopole antenna with the band-rejection characteristic is proposed. By adding a bent stub on the radiating patch and stepping the ground plane, the antenna provides an enhanced impedance-matching characteristic over the desired frequency band. The band-rejection characteristic is achieved by inserting an inverted-U shaped slot on the circular patch. The range of the rejection band can be adjusted by modifying the length and width of the inserted slot. The measured impedance bandwidth of the proposed antenna ranges from 2.9 to 12.1 GHz for VSWR Ͻ 2, excluding the rejection band. This antenna shows an omnidirectional radiation pattern similar to that of a monopole antenna. The measured maximum-gain variation is less than 4 dB over the operating-frequency band.


📜 SIMILAR VOLUMES


A band-notched swallow-tailed planar mon
✍ Haijin Zhou; Qizhong Liu; Baohua Sun; Yanjiong Yang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 1 views

## Abstract In this article, we propose a swallow‐tailed UWB planar monopole antenna that exhibits a notch characteristic in the 5‐GHz WLAN band (5.15–5.825 GHz) by inserting a hat‐shaped slot into the antenna. The effects of the length of the slot on the notched frequency band are analyzed. The ra

Analysis of the small slot-loaded ellipt
✍ Lin Peng; Chengli Ruan; Xuncai Yin 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 370 KB 👁 1 views

## Abstract A small slot‐loaded elliptical antenna with a band‐notched for ultra wide‐band (UWB) applications is presented in this article. Printed on a dielectric substrate with relative permittivity of 4.4, thickness of 1 mm, and fed by a 50 Ω microstrip line, the proposed antenna satisfies the U

A printed circular-ring monopole antenna
✍ Jin-Xiang Xiao; Mei-Fang Wang; Guo-Jian Li 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 228 KB 👁 1 views

## Abstract A printed circular‐ring monopole antenna with band‐notched feature for ultra‐wideband application has been presented and investigated. The band‐notched characteristic is achieved by attaching a C‐shaped short‐circuited stub. Experimental results show that the proposed antenna meets the

Parametric study of a UWB parallel-plate
✍ M. A. Peyrot-Solis; G. M. Galvan-Tejada; H. Jardon-Aguilar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 403 KB 👁 1 views

A directional ultra-wideband (UWB) planar antenna is presented in this article. The obtained antenna bandwidth is in the order of 10:1. The directional behavior is gotten by slating a planar monopole antenna with respect to the ground plane. The UWB and directional characteristics of this antenna wa

Design of a diversity antenna with stubs
✍ Seokjin Hong; Kyungho Chung; Jaewon Lee; Sangwook Jung; Sang-Sun Lee; Jaehoon Ch 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 497 KB 👁 1 views

## Abstract A two‐element diversity planar antenna for a multiple‐input multiple‐output application is proposed. By adopting two Y‐shaped radiators, the antenna provides wideband impedance matching characteristics over the desired frequency band. To reduce the mutual coupling between two radiating

Design of a band-selective filter for UW
✍ Kyungho Chung; Jaehoon Choi 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 275 KB

## Abstract A compact microstrip band‐selective filter for ultra‐wideband (3.1–10.6 GHz) radio system is proposed. The filter combines an optimum pseudo‐bandpass filter and a coupled resonator bandstop filter on both sides of the meandered 50‐Ω microstrip line. Three coupled resonators are modified