✦ LIBER ✦

Parameters affecting the full-shot molding of gas-assisted injection-molded parts

✍ Scribed by Shih-Jung Liu; Kuang-Huei Chang

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 484 KB
Volume: 22
Category: Article
ISSN: 0730-6679
DOI: 10.1002/adv.10036

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Secondary gas penetrations in ribs durin

Secondary gas penetrations in ribs during full-shot gas-assisted injection molding

✍ Sen-Yeu Yang; Chui-Te Lin; Jer-Haur Chang 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 227 KB 👁 1 views

Effect of gas channel design on the mold

Effect of gas channel design on the molding window of gas-assisted-injection-molded polystyrene parts

✍ Rean Der Chien; Shia-Chung Chen; Ming-Chung Lin; Ping-Hui Lee; Chun-Sheng Chen 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 224 KB 👁 2 views

Flow visualization of the gas-assisted i

Flow visualization of the gas-assisted injection molding process

✍ S. Y. Yang; S. J. Liou; W. N. Liou 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 397 KB 👁 2 views

Gas-assisted injection molding can effectively produce parts free of sink marks in thick sections and free of warpage in long plates. This research investigated the basic filling phenomena in a gas-assisted injection molding process with flow visualization. A high-speed video camera was used to reco

Analyses and measurements on bending per

Analyses and measurements on bending performance of gas-assisted injection molded parts

✍ Shia-Chung Chen; Sheng-Yan Hu; Rean Der Chien; Ming Chang Jeng 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 1 views

Numerical simulation and experimental measurements were carried out to assess the bending behavior of gas-assisted injection-molded parts. Polystyrene plate parts of different thicknesses, designed with various channel geometries, were gas-assisted injection molded. Part flexible strength was measur

Correlation of gas penetration and perme

Correlation of gas penetration and permeation to the structural performance of gas-assisted injection-molded parts

✍ Rean-Der Chien; Chun-Sheng Chen; Shia-Chung Chen; Hsien-Yang Yeh; De-Kun Huang 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 260 KB 👁 2 views

The correlation of insufficient gas penetration and gas permeation to structural performance in gas-assisted injection-molded polystyrene parts, designed with gas channels having five different types of cross sections but with the same section area, was investigated via tensile experiments and bendi

Influence of processing conditions and p

Influence of processing conditions and part design on the gas-assisted injection molding process

✍ Nan-Shing Ong; H. L. Lee; M. A. Parvez 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 2 views