✦ LIBER ✦

Effect of gas channel design on the molding window of gas-assisted-injection-molded polystyrene parts

✍ Scribed by Rean Der Chien; Shia-Chung Chen; Ming-Chung Lin; Ping-Hui Lee; Chun-Sheng Chen

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 224 KB
Volume: 90
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.12946

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Parameters affecting the full-shot moldi

Parameters affecting the full-shot molding of gas-assisted injection-molded parts

✍ Shih-Jung Liu; Kuang-Huei Chang 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB 👁 1 views

Influence of processing conditions and p

Influence of processing conditions and part design on the gas-assisted injection molding process

✍ Nan-Shing Ong; H. L. Lee; M. A. Parvez 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 2 views

Simulations of primary and secondary gas

Simulations of primary and secondary gas penetration for a gas-assisted injection-molded thin part with gas channel

✍ Shia Chung Chen; Nien-tien Cheng; Sheng-yan Hu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB 👁 1 views

Numerical simulations and experimental studies concerning melt flow and primary as well as secondary gas penetration during the filling and the postfilling stages in gas-assisted injection molding of a thin plate with a semicircular gas channel design were conducted. Distribution of the skin melt th

Flow visualization of the gas-assisted i

Flow visualization of the gas-assisted injection molding process

✍ S. Y. Yang; S. J. Liou; W. N. Liou 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 397 KB 👁 2 views

Gas-assisted injection molding can effectively produce parts free of sink marks in thick sections and free of warpage in long plates. This research investigated the basic filling phenomena in a gas-assisted injection molding process with flow visualization. A high-speed video camera was used to reco

Analyses and measurements on bending per

Analyses and measurements on bending performance of gas-assisted injection molded parts

✍ Shia-Chung Chen; Sheng-Yan Hu; Rean Der Chien; Ming Chang Jeng 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 1 views

Numerical simulation and experimental measurements were carried out to assess the bending behavior of gas-assisted injection-molded parts. Polystyrene plate parts of different thicknesses, designed with various channel geometries, were gas-assisted injection molded. Part flexible strength was measur

Correlation of gas penetration and perme

Correlation of gas penetration and permeation to the structural performance of gas-assisted injection-molded parts

✍ Rean-Der Chien; Chun-Sheng Chen; Shia-Chung Chen; Hsien-Yang Yeh; De-Kun Huang 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 260 KB 👁 1 views

The correlation of insufficient gas penetration and gas permeation to structural performance in gas-assisted injection-molded polystyrene parts, designed with gas channels having five different types of cross sections but with the same section area, was investigated via tensile experiments and bendi