✦ LIBER ✦

Palm kernel shell as a lightweight aggregate for concrete

✍ Scribed by Fidelis O. Okafor

Book ID: 107728405
Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 453 KB
Volume: 18
Category: Article
ISSN: 0008-8846
DOI: 10.1016/0008-8846(88)90026-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Palm kernel shell as a lightweight aggre

Palm kernel shell as a lightweight aggregate in concrete

✍ D.C. Okpala 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 586 KB

Oil palm shell as a lightweight aggregat

Oil palm shell as a lightweight aggregate for production high strength lightweight concrete

✍ Payam Shafigh; Mohd Zamin Jumaat; Hilmi Mahmud 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 424 KB

Concrete using waste oil palm shells as

Concrete using waste oil palm shells as aggregate

✍ H.B Basri; M.A Mannan; M.F.M Zain 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 114 KB

An investigation on the use of superplas

An investigation on the use of superplasticizer in palm kernel shell aggregate concrete

✍ Fidelis O. Okafor 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 374 KB

The performance of a superplasticizin s admixture in concrete made from palm kernel shell aggregate was investigated. Three concrete mixes of widely differing water/cement ratios were made and each of the mix contained three different dosage levels of the superplasticizer. The properties tested in

Engineering properties of concrete with

Engineering properties of concrete with oil palm shell as coarse aggregate

✍ M.A. Mannan; C. Ganapathy 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 75 KB

06/02303 A comparative study of concrete

06/02303 A comparative study of concrete properties using coconut shell and palm kernel shell as coarse aggregates: Olanipekun, E. A. et al. Building and Environment, 2006, 41, (3), 297–301.

📂 Article 📅 2006 🏛 Elsevier Science ⚖ 339 KB

performed at high temperature on a bauxite-based refractory, which is used in steel ladle linings. It is shown that for this ceramic few material parameters are sufficient to account for major differences of behaviour observed in compression tests and three-point bend tests.