𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Oxygen recombination rate on plastic-bonded cadmium electrodes doped with nickel(II) hydroxide

✍ Scribed by S. Petrovič; J. Garche; K. Wiesener; J. Mrha; J. Jindra


Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
575 KB
Volume
19
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.

✦ Synopsis


It was found that the rate of reduction of oxygen on plastic-bonded cadmium electrodes doped with Nl(OH), is highest when the added nickel amounts to 0.3%. If the active material 1s in prolonged contact with a solution of NISOq and then alkahzed, its oxygen reduction activity is appreciably lowered, probably owing to a cementation reaction glvmg metalhc nickel


📜 SIMILAR VOLUMES


Plastic-bonded electrodes for nickel-cad
✍ M. Musilová; J. Jindra; J. Mrha 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 265 KB

The rate of oxygen recombination (i.e., reduction) on plastic-bonded cadmium electrodes in sealed Ni-Cd systems can be controlled over a wide range by doping the negative active material with Ni(OH),, FeaOb or carbon black. The highest recombination rate was attained by combining all these additives

Plastic-bonded electrodes for nickel-cad
✍ J. Mrha; J. Jindra; M. Musilová; J. Peizker; M. Polydorová; J. Garche; M. Hauptm 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 644 KB

On account of their physical and chemical properties, sulfones form a very attractive group of orgamc solvents usable m lithium mtercalation batteries Conductivity measurements performed on vanous hthium salts m molten dimethylsulfone (DMSO\*) mdicate that LiC104 and LiAsF6/DMS02 are the most promis

Plastic-bonded electrodes for nickel—cad
✍ J. Jindra; J. Mrha; M. Musilová; M. Polydorová; J. Peizker 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 431 KB

The oxygen recombination (reduction) rate on plastic-bonded cadmium electrodes in sealed Ni-Cd systems can be increased by using metal screens applied to the gas side of the plastic-bonded cadmium electrode. The metal screen applied should have an optimum geometry (mesh size, wire diameter) to prov