𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Optimal temperature for the control of the product quality in batch polymerization: Simulation and experimental results

✍ Scribed by Claudio Scali; Roberto Ciari; Tiziana Bello; Giuseppe Maschio

Publisher
John Wiley and Sons
Year
1995
Tongue
English
Weight
993 KB
Volume
55
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Experimental study and simulation of the
Experimental study and simulation of the polymerization of methyl methacrylate at high temperature in a continuous reactor
✍ F. Fenouillot; J. Terrisse; T. Rimlinger πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 260 KB πŸ‘ 2 views

The bulk polymerization of MMA at high temperature (120 -180Β°C) in a continuous pilot-plant reactor has been studied. The polymerization is initiated by diterbutyle peroxide and the chain transfer agent is 1-butanethiol. A simulation program has been developed to predict the steady state behavior of

Interlaboratory study for the quality co
Interlaboratory study for the quality control of trimethyl-lead determination in simulated rainwater and urban dust
✍ Ph. Quevauviller; Y. Wang; R. M. Harrison πŸ“‚ Article πŸ“… 1994 πŸ› John Wiley and Sons 🌐 English βš– 417 KB

An interlaboratory programme has been started within the Measurements and Testing Programme (formerly BCR) of the European Commission to evaluate the performance of analytical techniques used for the determination of trimethyl-lead in simulated rainwater and urban dust. A first interlaboratory study

Materials for temperatures above 1500Β°C
Materials for temperatures above 1500Β°C in oxidizing atmospheres. Part II: Experimental results on the oxidation of MoSi2 composites and coated RSiC
✍ K. Bundschuh; M. SchΓΌtze πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 German βš– 878 KB

The topic ΒͺMaterials for temperatures above 1500 8C in oxidizing atmospheresΒΊ is discussed in a 3 part publication. In the first part a literature survey had been performed leading to the conclusion that either particle or fiber reinforced MoSi 2 -based materials or RSiC coated with a MoSi 2 -based