## Abstract In this article, the effects of varying the geometry of complementary split ring resonators (CSRRs) in microstrip lines loaded with such resonant elements is analyzed. Specifically, from a parameter extraction technique previously proposed by some of the authors, the electrical paramete
Open complementary split ring resonators: Physics, modelling, and analysis
✍ Scribed by Francisco Aznar; Adolfo Vélez; Miguel Durán-Sindreu; Jordi Bonache; Ferran Martín
- Book ID
- 102950452
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 937 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
This article is focused on the physics and analysis of a new type of planar resonant particles: the open complementary split ring resonators (OCSRRs). These resonators are the complementary counterpart of the open split ring resonators (OSRRs), previously presented by some of the authors, and consist on a pair of concentric hooks etched on a metal layer in opposite orientation. Like OSRRs, OCSRRs are open resonators that can be excited by means of a voltage or current source. An accurate circuit model of the particle is proposed and experimentally validated by exciting the particle by means of a coplanar waveguide transmission line. It will be also shown that OCSRRs exhibit higher order resonance frequencies, which can be selectively suppressed by introducing additional elements, as derived from a simple analysis based on mode parity. Because of the small electrical size of OCSRRs, such particles are useful for the synthesis of planar metamaterials and microwave components. V
📜 SIMILAR VOLUMES
## Abstract In this article, a novel miniaturized hybrid ring operating at 2 GHz is presented. By replacing the 270° branch line of conventional hybrid ring by −90° left‐handed branch line realized by complementary split ring resonators (CSRRs), the occupied area of our proposed hybrid ring can be
## Abstract We present a miniaturized dual‐passband filter module designed using double‐split complementary split ring resonator (DS‐CSRR) and split ring resonator (SRR). The use of SRR results in a significant size reduction of the filter comparing with edge‐coupled‐line filters. Two passbands are
## Abstract Band‐pass filters using complementary split ring resonator (CSRR) are proposed in this article. Two‐cascaded and three‐cascaded band‐pass filters using CSRR are designed, simulated, fabricated and measured. The resonant characteristics of the cascaded band‐pass filters show their advant
## Abstract An open complementary split‐ring resonator (OCSRR) based T‐junction power divider working at 900 MHz frequency is proposed in this paper. By embedding the OCSRR in the microstrip transmission line, slow wave effect is introduced to achieve size reduction. The proposed power divider size
## Abstract On the basis of the double resonant property of the complementary split‐ring resonators (CSRRs), a novel dual‐band microstrip filter is designed, making use of CSRRs as resonant unit and T‐shaped stub as feeding structure. More than one transmission zeros are formed due to the cross cou