✦ LIBER ✦

On the thermal etching of silicon iron

✍ Scribed by C.G. Dunn; J.L. Walter

Publisher: Elsevier Science
Year: 1959
Weight: 413 KB
Volume: 7
Category: Article
ISSN: 0001-6160
DOI: 10.1016/0001-6160(59)90137-3

No coin nor oath required. For personal study only.

✦ Synopsis

On the thermal etching of silicon iron*

The formation of striations or steps and of boundary grooves at metal surfaces are two effects of thermal etching that occur when metals are heated to relatively high temperatures.

This letter presents some observations on the thermal etching of silicon iron.

Polycrystalline sheet specimens, 0.012 in. thick of high purity silicon iron, containing about 3% silicon, *

📜 SIMILAR VOLUMES

The Thermal Etching of GaP

✍ S. Kocsis; E. Lendvay 📂 Article 📅 1974 🏛 John Wiley and Sons 🌐 English ⚖ 692 KB

## Abstract The thermal decomposition and etching of GaP have been investigated. The {111} GaP surfaces were treated in 10^−2^—10^−5^ torr vacuum, and in hydrogen and argon atmosphere, in a temperature range of 900—1300 K. Under the different experimental conditions the etched surfaces show differe

The influence of etching conditions on s

The influence of etching conditions on surface contamination during silicon etching in CF4 plasma

✍ Dr. rer. nat. B. Glück 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB

The Growth of Diamond Films on Laser-Etc

The Growth of Diamond Films on Laser-Etched Porous Silicon

✍ Baranauskas, V. ;Peterlevitz, A.C. ;Li, B.B. ;Tosin, M.C. ;Ceragioli, H.J. ;Durr 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 182 KB 👁 2 views

The Origin of the Magnetism of Etched Si

The Origin of the Magnetism of Etched Silicon

✍ Patrick J. Grace; Munuswamy Venkatesan; Jonathan Alaria; J. Michael D. Coey; Gre 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 340 KB

Effect of chemical etching combined with

Effect of chemical etching combined with laser illumination on the photoluminescence of porous silicon

✍ J.Q. Duan; B.R. Zhang; L.Z. Zhang; J.C. Mao; G.G. Qin 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 174 KB

We have fabricated porous silicon layers (PSLs) in the anodizing solution, HF(48wt.\%): \(\mathrm{H}_{2} \mathrm{O}=1: 1\). After anodization, the PSL was etched in the same chemical solution as used for anodization and then illuminated with the \(476.5 \mathrm{~nm}\) line, with a power of \(20 \mat

Influence of filler content, particle si

Influence of filler content, particle size and temperature on thermal diffusivity of polypropylene-iron silicon composites

✍ M. Anhalt; B. Weidenfeller 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 2 views

## Abstract The filler fraction, particle size and temperature dependence of thermal diffusivity in polypropylene‐iron silicon composites were examined by laser flash method. Results show that raising the filler content raises the thermal diffusivity of the composite material only slightly. Neverth