✦ LIBER ✦

On the resistance to crack initiation and growth

✍ Scribed by B.H. Kim; C.R. Joe

Publisher: Elsevier Science
Year: 1989
Tongue: English
Weight: 826 KB
Volume: 34
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(89)90255-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The initiation of creep crack growth

✍ R.A. Ainsworth 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 832 KB

Influence of loading rate on the crack r

Influence of loading rate on the crack resistance curve and the initiation temperature

✍ R. Packeiser; D. Aurich; J. Ziebs 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 388 KB

A Continuum Mechanics Approach for Crack

A Continuum Mechanics Approach for Crack Initiation and Crack Growth Predictions

✍ Y. Jiang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 311 KB

Discussion of initial and subsequent cra

Discussion of initial and subsequent crack growth

✍ K.B. Broberg 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 450 KB

The J-integral criterion for initial crack growth is discussed. It is pointed out that an essential requirement for the validity of this criterion is autonomy of the end-region near the crack-tip. This autonomy ought to exist even at large scale yielding if there is a substantial strain hardening, i

The contribution of void growth to the c

The contribution of void growth to the crack resistance of ductile materials

✍ M.H. Poech; H.F. Fischmeister 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 822 KB

Ah&act-The deformability of ductile materials in tension is restricted by the initiation and growth of voids and by their final coalescence into a crack. In this paper, a model is proposed to calculate the stress vs displacement curve of a volume element comaining a growing void, which takes into ac

The crack initiation and plastic work

✍ D.Z. Zhang; X.D. Huang 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 417 KB

The effect of the ratio a/W on the values of si and Ji in a structural steel has been studied by measuring the crack opening displacement and J-integral at initiation of crack growth in three-point bend specimens with shallow and deep notches and by three-dimensional finite element method analysis.