𝔖 Bobbio Scriptorium
✦   LIBER   ✦

On the morphology of the unidirectionally solidified AgSi eutectic alloy

✍ Scribed by Dr. Krystal Chrost; Dr.Ing. Joachim Frühauf; Dipl.-Phys. Günther Schmidt


Publisher
John Wiley and Sons
Year
1983
Tongue
English
Weight
515 KB
Volume
18
Category
Article
ISSN
0232-1300

No coin nor oath required. For personal study only.

✦ Synopsis


It is known that the structure of anormal eutectics occurring in the systems metal-Si, metal-Ge strongly depends on the conditions of growththat is, on the solidification rate R and the temperature gradient G. Structures occurring in the unidirectionelly solidified Ag-Si eutectic alloy with morphology corresponding to region B according to classification adopted by HELLAWELL for the system Al-si were investigated. For the description of the morphology, three parameters were adopted : Adistance between the centres of s i crystals, d -length of arms of cross-like crystals, bthickness of Si plates. It has been found that a t similar morphologies of Si crystals, expressed by constant values of the relation A/d, the known relation A*R = const. is fulfilled, too. Es ist bekannt, dalj die Strukturen anormaler Eutektike, wie sie bei den Systemen Metall-si und Metall-Ge vorkommen, stark von den Wachstumsbedingungen, Erstarrungsgeschwindigkeit R und Temperaturgradient G, abhangen. Es werden Strukturen der gerichtet erstarrten Ag-Si-Legierung mit Morphologien der Region B der von HELLAWELL verwendeten Klessifikation untersucht. Zur Beschreibung der Morphologien dienen drei Parameter: A -Abstand zwischen den Zentren der Si-Kristalle, d -Lange der &me der kreuzformigen Kristalle, b -Dicke der Si-Plattchen. Es wurde gefunden, daB fiir ahnliche Morphologien der Si-Kristalle, ausgedruckt durch einen konstanten Wert fur das Verhaltnis A/d, die bekannte Beziehung A2R = const. er f ull t wird.


📜 SIMILAR VOLUMES


Tensile strength of eutectic, directiona
✍ Dr. U. W. Hildebrandt; A. R. Nicoll 📂 Article 📅 1981 🏛 John Wiley and Sons 🌐 English ⚖ 555 KB

## Abstract The influence of various alloy elements on tensile strength of the eutectic, directionally solidified superalloy 73 C was determined. The tensile properties of the base alloy had been increased by Al, Y and C as alloying elements, while Ni and Ti showed a decreasing effect (alloy soften