On the circularly polarized hemi-ellipsoidal dielectric resonator antenna
✍ Scribed by Bin Li; Kwok Wa Leung
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 220 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The circularly polarized cross‐slot‐coupled hemi‐ellipsoidal dielectric resonator antenna (HEDRA) is studied in this letter. Reasonable agreement between simulation and measurement is obtained. A HEDRA is demonstrated, which has a 10‐dB impedance bandwidth (S~11~ < −10 dB) of 15.4% and a 3‐dB axial ratio bandwidth of 3.9%. The characteristics of the HEDRA are found. In addition, a comparison between the straight‐ and cross‐slot feeds is made in this letter. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 1763–1766, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21749
📜 SIMILAR VOLUMES
## Abstract Design of a microstrip‐line‐feed slot‐coupled cylindrical dielectric resonator antenna (DRA) for circular polarization (CP) is investigated experimentally. The occurrence of the two orthogonal near‐degenerate resonant modes is mainly excited by a perturbed annular slot that is, a C‐shap
Figure 3 Results of Example 2 with additive colored Gaussian Ž . Ž . noise. a Output beam patterns under correct steering. b Output SINR versus pointing error. w x algorithm 3 in terms of estimation sensitivity to parameter uncertainty and reduction of the peak of the error spectrum.
## Abstract A circularly polarized ceramics dielectric resonator antenna fed by a Y‐shaped microstrip is proposed and analyzed. The CP design is achieved by simply adjusting the lengths and widths of two quadrate shorted stubs. The antenna is compact in structure, whose radius is only 4.5 mm. The r
## Abstract With the loading of a rectangular patch having a suitable aspect ratio, circular polarization (CP) radiation of low‐profile square dielectric resonator (DR) antennas can easily be obtained. The proposed antenna design can easily be excited by using a microstrip‐line feed, and many proto