Abstract
The solution treatment of an as‐cast ASTM F‐75 alloy was investigated. Microstructural evolution was followed during thermal processing, in particular with regard to the content and type of carbides formed. To evidence any probable carbide transformations occurring during the heating stage, as well as to clarify their effect on the carbide dissolution kinetics, three heating rates were studied. Image analysis and scanning electron microscopy techniques were used for microstructural characterization. For the identification of precipitates, these were electrolytically extracted from the matrix and then analyzed by X‐ray diffraction. It was found that the precipitates in the as‐cast alloy were constituted by both a M~23~C~6~ carbide and a σ intermetallic phase. The M~23~C~6~ carbide was the only phase identified in solution‐treated specimens, regardless of the heating rate employed, which indicated that this carbide dissolved directly into the matrix without being transformed first into an M~6~C carbide, as reported in the literature. It was found that the kinetics of dissolution for the M~23~C~6~ carbide decreased progressively during the solution treatment, and that it was sensitive to the heating rate, decreasing whenever the latter was decreased. Because the M~23~C~6~ carbide was not observed to suffer a phase transformation prior to its dissolution into the matrix, the effect of the heating rate was associated to the morphological change occurred as the specimens were heated. The occurrence of the observed phases was analyzed with the aid of phase diagrams computed for the system Co–Cr–Mo–C. © 2001 Wiley Periodicals, Inc. J Biomed Mater Res 59: 378–385, 2002