✦ LIBER ✦

Numerical and Experimental Analysis of Residual Stresses in Full-Penetration Laser Beam Welding of Ti6Al4V Alloy

✍ Scribed by Liu Chuan; Zhang Jianxun; Niu Jing

Publisher: Elsevier
Year: 2009
Weight: 238 KB
Volume: 38
Category: Article
ISSN: 1875-5372
DOI: 10.1016/s1875-5372(10)60066-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

X-ray measurement of residual stresses i

X-ray measurement of residual stresses in laser surface melted Ti-6Al-4V alloy

✍ J.M. Robinson; B.A. Van Brussel; J.Th.M. De Hosson; R.C. Reed 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 311 KB

Investigation of electron-beam welding i

Investigation of electron-beam welding in wrought Inconel 706—experimental and numerical analysis

✍ Paolo Ferro; Andrea Zambon; Franco Bonollo 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 851 KB

Electron-beam welding (EBW) is commonly employed in the aeroengine industry for the welding of high integrity components, fabricated from high-strength superalloys. For such applications, it is important to predict distortions and residual stresses induced by the process. Melt run trials have been c

Structure-property investigations on a l

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength

✍ W.V. Vaidya; M. Horstmann; V. Ventzke; B. Petrovski; M. Koçak; R. Kocik; G. Temp 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB

## Abstract Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treat