𝔖 Bobbio Scriptorium
✦   LIBER   ✦

X-ray measurement of residual stresses in laser surface melted Ti-6Al-4V alloy

✍ Scribed by J.M. Robinson; B.A. Van Brussel; J.Th.M. De Hosson; R.C. Reed

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
311 KB
Volume
208
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Corrosion behaviour of laser gas-nitride
Corrosion behaviour of laser gas-nitrided Ti–6Al–4V alloy in nitric acid solution
✍ R.Sh. Razavi; M. Salehi; M. Monirvaghefi; G.R. Gordani πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 769 KB

Laser gas nitriding of the Ti-6Al-4V alloy under a pure nitrogen environment of 30 l/min gas flow rate, was carried out with 500 mJ laser beams, produced by a Nd:YAG-pulsed laser at 5 mm defocused distance, and 1.5 mm/s sample traverse velocities. The microstructure and corrosion behaviour of the ni

Influence of surface roughness on consec
Influence of surface roughness on consecutively hydrogen absorption cycles in Ti–6Al–4V alloy
✍ Alejandra LΓ³pez-SuΓ‘rez πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 920 KB

In the present work the influence of roughness of the material surface with hydrogen absorption in Tie6Ale4V alloy during four hydrogenated cycles is studied. The Tie6Ale4V alloy samples were hydrogenated during several cycles at 650 C for two hours, in 50% hydrogen and 50% argon atmospheres, 1 atm