## Abstract A new design of wideband microwave bandpass filter based on intercoupled split‐ring resonator is proposed. The split‐ring resonator structure is well‐know for its unique resonance feature that exhibit a negative permeability. By implementing the split‐ring resonator directly on a micros
Novel wideband filter with a transmission zero based on split-ring resonator DGS
✍ Scribed by Zheng-Zheng Hou
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 219 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A wideband microstrip filter composed of split‐ring resonator DGS and lumped chip capacitor is presented in this article, which has a transmission zero at the right out‐of‐band. By using the equivalent‐circuit analysis and parameter extracting technology for the split‐ring resonator DGS, a band‐pass filter with a wide passband from 1 GHz to 2.4 GHz is fabricated and measured, making use of lumped chip capacitors and T‐shaped open‐circuit stub to achieve series and shunt capacitance, respectively. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1691–1693, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23452
📜 SIMILAR VOLUMES
## Abstract In this letter, a novel miniaturized split‐ring resonator (SRR) structure is introduced in designing high‐frequency selectivity and stopband expanded bandpass filter (BPF) with four transmission zeros.Such fundamental resonators consist of a pair of half‐wavelength hairpin‐shaped ring r
## Abstract This article presents an electronically tunable varactor‐loaded microstrip bandpass filter based on the planar split ring resonators (SRRs). The varactor is a reverse‐biased semiconductor diode, and is connected between the concentric rings of the SRR. An individual varactor loaded SRR
## Abstract One novel bandpass filter implemented with combination of two different structures‐complementary split rings resonators (CSRRs) and substrate integrated waveguide (SIW) is proposed in this article. Several CSRRs are etched on the surface of SIW to form the stopband with very sharp rejec
## Abstract A novel dual‐band bandpass filter using stepped impedance resonator is proposed in this letter. New coupling structures are illustrated to replace the normal counterparts, the circuit size is reduced about 40% compared with the conventional BPF with the same specifications, while the ne
## Abstract This paper presents a novel, compact, low‐insertion‐loss, sharp‐rejection, wideband microstrip bandpass filter. The filter is based on a ring resonator with direct‐connected orthogonal feed lines, and uses two stepped‐impedance open stubs to construct a wideband passband with two sharp