## Abstract A compact planar bandpass filter is presented in this letter, which is implemented by the combination of three different electromagnetic structures, saying, substrate‐integrated waveguide (SIW), square complementary split‐ring resonators (CSRRs) and dumbbells slot.The resonator is forme
A novel bandpass filter based on complementary split rings resonators and substrate integrated waveguide
✍ Scribed by Wenquan Che; Chao Li; Kuan Deng; Lisheng Yang
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 166 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
One novel bandpass filter implemented with combination of two different structures‐complementary split rings resonators (CSRRs) and substrate integrated waveguide (SIW) is proposed in this article. Several CSRRs are etched on the surface of SIW to form the stopband with very sharp rejection. One prototype was fabricated, the measured results indicate 30% passband (at −15 dB return loss), the rejection band ranges from 6.4 GHz to 7.8 GHz, about 20% bandwidth at −20 dB rejection, the maximum rejection even reaches 50 dB. The rejection skirt is very sharp, only 18 MHz. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 699–701, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23182
📜 SIMILAR VOLUMES
## Abstract This article presents an electronically tunable varactor‐loaded microstrip bandpass filter based on the planar split ring resonators (SRRs). The varactor is a reverse‐biased semiconductor diode, and is connected between the concentric rings of the SRR. An individual varactor loaded SRR
## Abstract We present a miniaturized dual‐passband filter module designed using double‐split complementary split ring resonator (DS‐CSRR) and split ring resonator (SRR). The use of SRR results in a significant size reduction of the filter comparing with edge‐coupled‐line filters. Two passbands are
## Abstract The folded substrate‐integrated waveguide (FSIW) takes the advantages of more compact size and higher integration than the conventional SIW structures, probably resulting in a very compact design. One simple narrow‐slot bandpass filter is thus proposed and implemented to demonstrate the
## Abstract A wideband microstrip filter composed of split‐ring resonator DGS and lumped chip capacitor is presented in this article, which has a transmission zero at the right out‐of‐band. By using the equivalent‐circuit analysis and parameter extracting technology for the split‐ring resonator DGS
## Abstract This letter presents the design, implementation and experiment of planar and multilayer three‐pole cross‐coupled bandpass filters realized by substrate‐integrated waveguide (SIW). The two three‐pole filters centered at 10 GHz with one transmission zero are simulated by using full‐wave e