GHz. For this reason, the spacing t was selected to be 1.0 mm for the prototype constructed here. The radiation characteristics of the constructed prototype were also studied. Figures 7 and8 plot the measured radiation patterns at the center frequencies (2442 and 5500 MHz) for the 2.4-GHz and 5.2/5
Novel compact elliptic-function narrow-band bandpass filters using microstrip open-loop resonators with coupled and crossing lines
✍ Scribed by Cheng-Cheh Yu; Kai Chang
- Book ID
- 114553235
- Publisher
- IEEE
- Year
- 1998
- Tongue
- English
- Weight
- 171 KB
- Volume
- 46
- Category
- Article
- ISSN
- 0018-9480
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this letter, a highly selective microstrip bandpass filter using triangular open‐loop resonators with improved cross‐coupled structure is designed, fabricated, and measured. The new cross coupling structure is implemented by inserting two L‐shaped stubs into the triangular open‐loop
## Abstract In this paper, a bandpass filter using a microstrip slow‐wave open‐loop resonator with high impedance lines is presented. This resonator has the high impedance of a loaded microstrip line, which significantly increases not only the slow‐wave effect but also the dispersion effect. These
## Abstract A novel transversal bandpass filter is proposed in this letter. Different from conventional two‐order planar transversal filter, the proposed filter is a three‐order planar transversal filter by incorporating microstrip dual‐mode open‐loop resonator and slot line resonator. Furthermore,