𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Novel Approaches to the Improvement of High Temperature Corrosion Resistance

✍ Scribed by M. Schütze; W. J. Quadakkers


Publisher
John Wiley and Sons
Year
2005
Tongue
German
Weight
25 KB
Volume
56
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Influence of novel cycle concepts on the
✍ Bettina Bordenet 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 211 KB

## Abstract The aim to reduce CO~2~ emissions has triggered the evaluation of new cycle concepts for power plants. CO~2~‐capture concepts are also evaluated to add on new and existing power plants. For combined cycle power plants (CCPP), different cycles are investigated such as integrated gasifica

On the use of conducting polymers to imp
✍ J. I. Iribarren; E. Armelin; F. Liesa; J. Casanovas; C. Alemán 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 251 KB

## Abstract This work analyzes the physical properties of several paints and the resistance against corrosion that they impart after being modified by adding a conducting polymer. Five different formulations were selected: four polyurethane resins (two varnish and two aqueous based) and one multico

Novel approach to the design of unequal
✍ Tan Yang; Jian-Xin Chen; Quan Xue 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 233 KB

## Abstract This letter presents the design of an unequal Wilkinson power divider with a high‐dividing ratio. By proportionally reducing the impedances in both arms and employing T‐shaped structure to replace quarter wavelength transmission lines with very low characteristic impedances, the propose

A fast and practical approach to the det
✍ Ban Leong Ooi; Bo Chen; Fujiang Lin; Pang Shyan Kooi; Chi So Hui 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB

## Abstract A simple, robust, accurate method to extract the thermal resistance of BJT/HBT devices is proposed, which only needs the measured device DC I‐V characteristics at room temperature. No optimization is needed to extract the thermal resistance. The proposed method is verified using a varie