Nonisothermal cure kinetics of DGEBA with novel aromatic diamine
✍ Scribed by M. Ghaemy; M. Barghamadi; H. Behmadi
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 361 KB
- Volume
- 103
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The effect of the molar ratio of diglycidyl ether of a bisphenol‐A based epoxy (DGEBA) and synthesized 4‐phenyl‐2,6‐bis(4‐aminophenyl)pyridine (PAP) as curing agent during nonisothermal cure reaction by the Kissinger, Ozawa, and isoconversional equations was studied. The cure mechanism was studied by FTIR analysis. Kinetic analysis of the curing reaction of DGEBA at two different concentrations (42 and 32 phr) of the curing agent was studied by using DSC analysis. With an increasing PAP content, the pre‐exponential factor increased by increasing collision probability between epoxide and primary or secondary amine groups in noncataltyic or catalytic modes. The activation energy also increased because of the increasing content of crosslink density. The activation energies obtained from three equations were in good agreement. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3076–3083, 2007.
📜 SIMILAR VOLUMES
## Abstract Epoxy resins, 4, 4′‐diglycidyl (3, 3′, 5, 5′‐tetramethylbiphenyl) epoxy resin (TMBP) containing rigid rod structure as a class of high performance polymers has been researched. The investigation of cure kinetics of TMBP and diglycidyl ether of bisphenol‐A epoxy resin (DGEBA) cured with
## Abstract The effect of an octadecylammonium‐exchanged montmorillonite on the curing kinetics of a thermoset system based on a bisphenol A epoxy resin and a poly(oxypropylene)diamine curing agent were studied with differential scanning calorimetry (DSC) in isothermal and dynamic (constant‐heating