✦ LIBER ✦

Nondestructive evaluation of protective and thermal barrier coatings: a current survey

✍ Scribed by W.N. Reynolds

Publisher: Elsevier Science
Year: 1987
Weight: 419 KB
Volume: 20
Category: Article
ISSN: 0308-9126
DOI: 10.1016/0308-9126(87)90402-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermal conductivity issues of EB-PVD th

Thermal conductivity issues of EB-PVD thermal barrier coatings

✍ U. Schulz; H.-J. Rätzer-Scheibe; B. Saruhan; A. F. Renteria 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 411 KB

## Abstract The thermal conductivity of electron‐beam physical vapor deposited (EB‐PVD) thermal barrier coatings (TBCs) was investigated by the Laser Flash technique. Sample type and methodology of data analyses as well as atmosphere during the measurement have some influence on the data. A large v

Effect of surface preparation on the dur

Effect of surface preparation on the durability of NiCoCrAlY coatings for oxidation protection and bond coats for thermal barrier coatings

✍ E. M. Meier Jackson; N. M. Yanar; M. C. Maris-Jakubowski; K. Onal-Hance; G. H. M 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 565 KB

## Abstract A principal concern with alumina‐forming coatings for high‐temperature oxidation protection and bond coats (BCs) for ceramic thermal barrier coatings (TBCs) used in gas turbines is the spalling of the alumina scales during service. This paper describes the effects of BC surface preparat

Evaluation of aluminide diffusion coatin

Evaluation of aluminide diffusion coatings for thermal cyclic oxidation protection of a nickel-base superalloy

✍ A. Elsawy; H. Soda; A. McLean 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 756 KB

The cast wires were used as evaporation sources for ion-vapour deposition followed by diffusion heat treatments to form nickel aluminide coatings. In order to examine the oxidation resistance of these coatings at elevated temperatures, thermal cyclic oxidation experiments were carried out in air at

Design and Properties of Thermal Barrier

Design and Properties of Thermal Barrier Coatings for advanced turbine engines

✍ Dr. M. Peters; Dr. K. Fritscher; Dr. G. Staniek; Dr. W. A. Kaysser; Dr. U. Schul 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 712 KB

## Abstract The efficiency and performance of advanced aircraft turbines can be markedly increased if higher gas temperatures are used. Although the highly loaded blades and vanes in the high pressure turbine are heavily cooled, today's substrate materials are unable to provide sufficient strength

Barrier and self-healing abilities of co

Barrier and self-healing abilities of corrosion protective polymer coatings and metal powders for aluminum alloys

✍ A. Yabuki; H. Yamagami; K. Noishiki 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 German ⚖ 227 KB

## Abstract Several types of coatings, designed to improve the resistance of aluminum alloys to corrosion in seawater, were examined. A coating with a thickness of approximately 30 μm was applied to the surface of aluminum alloy 3003, and after creating an artificial defect by means of a knife‐edge

Nondestructive evaluation of polymer coa

Nondestructive evaluation of polymer coatings by mirage–FTIR spectroscopy: A tool for surface characterization

✍ G. C. Pandey; Ajay Kumar; A. C. Boccara; D. Fournier 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 126 KB 👁 1 views

We demonstrate the unusual applications of the recently developed mirage-Fourier transform infrared (FTIR) spectroscopy for nondestructive characterization of polymer coatings, especially on absorbing substrates or very thin coatings, where conventional FTIR techniques tend to fail. The mirage-FTIR