Effect of surface preparation on the durability of NiCoCrAlY coatings for oxidation protection and bond coats for thermal barrier coatings

✍ Scribed by E. M. Meier Jackson; N. M. Yanar; M. C. Maris-Jakubowski; K. Onal-Hance; G. H. Meier; F. S. Pettit

• Publisher: John Wiley and Sons
• Year: 2008
• Tongue: German
• Weight: 565 KB
• Volume: 59
• Category: Article
• ISSN: 0947-5117
• DOI: 10.1002/maco.200804133

✦ Synopsis

Abstract

A principal concern with alumina‐forming coatings for high‐temperature oxidation protection and bond coats (BCs) for ceramic thermal barrier coatings (TBCs) used in gas turbines is the spalling of the alumina scales during service. This paper describes the effects of BC surface preparation on the durability of NiCoCrAlY coatings exposed under thermal cycling conditions. State‐of‐the‐art TBC systems deposited by electron beam physical vapor deposition (EBPVD) with NiCoCrAlY overlay BCs were found to fail as the result of defects which included transient oxides, defects in the BC surface, defects in the as‐deposited microstructure of the TBC, and excessive oxidation of reactive element additions. In some instances, the TBC life was greatly extended by surface treatments, such as fine polishing. The oxidation behavior of NiCoCrAlY coatings, absent a TBC, was found to be sensitive to Y content and to surface preparation. This paper describes how a variety of surface treatments affected coating lives and failure mechanisms.