## Abstr. 15041513 R119 drawn relative to exposures in these species. Exposure in a S or CI environment at 800ยฐC results in grain boundary penetration and intergranular embrittlement in Ni270. Both species are more damaging than oxygen. Chlorine embrittlement is only severe for low test temp. whic
Non-metallic inorganic materials
- Book ID
- 102938116
- Publisher
- John Wiley and Sons
- Year
- 1991
- Tongue
- German
- Weight
- 587 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
โฆ Synopsis
Non-metallic inorganic materials/ Nichtmetallische anorganische Werkstoffe
91 -3380 Experiences With Advanced Refractories for Torpedo Ladles. (Retroactive Coverage). Development of AIzOI-SIC-C bricks lor torpedo car liners IS described up to 1986. torpedo cars were lined with an andalusite analor oauxite-type refractory Shrmkage cracmg caJsea by temperature drop in an empty car caused serious wear in the joints between the bricns Intermediate repa r was needed at 50-heat intervals. The introduction 01 desulfurizatJon caused excessive sku1 formation W th the AI,OJ-SIC--C bricks, graphtte flakes in the brick prowoe llexibtltly and resistance to transverse cracking Slag penetration is also prevented by the grapnite and desiagging is made Baser. Grapns -D.M Y.
๐ SIMILAR VOLUMES
## 80-0884 Preferential Lateral Chemical Etching in Reactive Ion Etching of Aluminum and Aluminum Alloys. Reactive ion etching of Al and its alloys in CCI,/Ar plasmas produces vertical etch profiles and residue-free etch regions. However, under certain conditions, preferential lateral chemical etc
Werkstoffe und Korrosion 37, (1986) corrosion environments, the cracks initiated always at hot corroded grain boundaries near the surface of generally at oxide spikes in surface-connected grain boundaries. The crack propagation from these nucleation sites is essentially transgranular for a11 environ