๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Non-metallic inorganic materials

Book ID
102935487
Publisher
John Wiley and Sons
Year
1984
Tongue
German
Weight
589 KB
Volume
35
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

โœฆ Synopsis

Abstr. 15041513 R119

drawn relative to exposures in these species. Exposure in a S or CI environment at 800ยฐC results in grain boundary penetration and intergranular embrittlement in Ni270. Both species are more damaging than oxygen. Chlorine embrittlement is only severe for low test temp. which, most probably, is a consequence of a loss of CI on heating the samples. A Ni-base superalloy, lN738. is severely embrittled after exposure either in elemental S vapor or in a simulated hot corrosion environment The extent of this damage, presumed to be due to the intergranular penetration of S. is far greater than that normally reported based on observations of superficial scales. 13 ref.

-AA D.A.

๐Ÿ“œ SIMILAR VOLUMES

Non-metallic inorganic materials
Non-metallic inorganic materials
๐Ÿ“‚ Article ๐Ÿ“… 1991 ๐Ÿ› John Wiley and Sons ๐ŸŒ German โš– 587 KB

## Non-metallic inorganic materials/ Nichtmetallische anorganische Werkstoffe 91 -3380 Experiences With Advanced Refractories for Torpedo Ladles. (Retroactive Coverage). Development of AIzOI-SIC-C bricks lor torpedo car liners IS described up to 1986. torpedo cars were lined with an andalusite ana

Non-metallic inorganic materials
Non-metallic inorganic materials
๐Ÿ“‚ Article ๐Ÿ“… 1980 ๐Ÿ› John Wiley and Sons ๐ŸŒ German โš– 536 KB

## 80-0884 Preferential Lateral Chemical Etching in Reactive Ion Etching of Aluminum and Aluminum Alloys. Reactive ion etching of Al and its alloys in CCI,/Ar plasmas produces vertical etch profiles and residue-free etch regions. However, under certain conditions, preferential lateral chemical etc

Non-metallic inorganic materials
Non-metallic inorganic materials
๐Ÿ“‚ Article ๐Ÿ“… 1986 ๐Ÿ› John Wiley and Sons ๐ŸŒ German โš– 542 KB

Werkstoffe und Korrosion 37, (1986) corrosion environments, the cracks initiated always at hot corroded grain boundaries near the surface of generally at oxide spikes in surface-connected grain boundaries. The crack propagation from these nucleation sites is essentially transgranular for a11 environ