Nitroxide-Mediated Polymerization of Styrene in a Continuous Tubular Reactor
✍ Scribed by Thomas E. Enright; Michael F. Cunningham; Barkev Keoshkerian
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 114 KB
- Volume
- 26
- Category
- Article
- ISSN
- 1022-1336
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.
Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor.
magnified imageEvolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor.
📜 SIMILAR VOLUMES
## Abstract The use of copper tubing as both the reactor and as a catalyst source is demonstrated for continuous controlled radical polymerization of methyl acrylate at ambient temperature and at low solvent content of 30%. The high surface area provided by the copper walls mediates the reaction vi
## Abstract Nitroxide‐mediated controlled/living radical precipitation polymerization of styrene in supercritical carbon dioxide has been performed using SG1 and AIBN as mediator and initiator, respectively. The equivalent bulk polymerization proceeded at a rate ≈1.58 times faster than the precipit
## Abstract The effect of the geometrical and operational parameters on the mixing characteristics of a Couette–Taylor vortex flow reactor (CTVFR) were investigated and were correlated with the same parameters by using the tank‐in‐series model. Continuous emulsion polymerization of styrene was cond
## Abstract An experimental analysis of the bulk polymerization of styrene initiated by azobisisobutyronitrile was carried out in a tubular reactor. The experiments performed in a 2.362‐cm I.D., 6‐meter long jacketed reactor showed that: (1) it was feasible for a tubular reactor to produce accepta