𝔖 Bobbio Scriptorium
✦   LIBER   ✦

New CPW low-pass filter based on a slow wave structure

✍ Scribed by F. Martín; F. Falcone; J. Bonache; T. Lopetegi; M. A. G. Laso; M. Sorolla

Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
121 KB
Volume
38
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A new periodic loaded coplanar waveguide (CPW) low‐pass filter with very sharp cutoff has been designed and fabricated. The device consists of a CPW structure with T‐shaped periodic patterns on both the central strip and ground planes. With such a design, capacitive coupling is added between the signal strip and ground planes at periodic positions, resulting in a filtering action and slow‐wave effect. In addition to a sharp cutoff, the device exhibits very low insertion loss in the pass band, wide rejection bandwidth, and simple design and fabrication. © 2003 Wiley Periodicals, Inc. Microwave Opt Technol Lett 38: 190–193, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11011

📜 SIMILAR VOLUMES

A new type of slow-wave 1D PBG microstri
A new type of slow-wave 1D PBG microstrip band-pass filter
✍ Dusan Nesic 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 75 KB

## Abstract In this paper, a new type of slow‐wave 1D PBG microstrip band‐pass filter with a half‐wavelength linear resonator is introduced. Reduction of the central frequency (slow‐wave effect) is over 50%, as compared to the conventional band‐pass filter of the same type. Additional coupling is o

A novel microstrip band-pass filter base
A novel microstrip band-pass filter based on hole coupling structure
✍ Yan Yuan; Jun Xu; Yan-Qing Xu; Xiao-Chuan Zhang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 467 KB

## Abstract A novel C‐band hole‐coupled bandpass filter with metallized post (or via‐hole) arrays directly embedded in middle of the microstrip line is presented in this letter.The proposed filter removes via‐hole arrays embedded along waveguide section from the half‐mode substrate integrated waveg

A new compact band-pass filter based on
A new compact band-pass filter based on an asymmetric short-circuited spurline resonator
✍ P. Rodriguez-Cepeda; M. Ribó; F.J. Pajares; A. M. Sánchez; J. R. Regué; A. Pérez 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 452 KB

## Abstract In this letter, a new compact two‐pole band‐pass filter (BPF) based on an asymmetric short‐circuited spurline resonator is presented. The filter is modeled by means of a new multimodal circuit model for a microstrip to three‐line‐microstrip cross, which allows a rigorous study of a very

On the TWT based on a helix slow-wave st
On the TWT based on a helix slow-wave structure sustained by rectangular dielectric rods
✍ Stefano D'Agostino; Francesco Emma; Claudio Paoloni 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 117 KB 👁 1 views

Figure 7 Pulse response of the 1 km fiber link, using a DFB laser diode transmitter and a semiconductor optical amplifier SOA . Ž . Ž . The SOA is placed at the transmitter top and at the receiver bottom . Full time scale range: 6 ns levels of optical power. This is due to the stronger optical satu

Effect of mechanical tolerance of T-shap
Effect of mechanical tolerance of T-shaped rods in a TWT based on a helix slow-wave structure
✍ Stefano D'agostino; Claudio Paoloni 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 254 KB 👁 1 views

The effect of the mechanical tolerances of a dielectric rod on the normalized phase ¨elocity and interaction impedance of the helix slow-wa¨e structure used in tra¨eling-wa¨e tubes is analyzed. In this letter, one of the most common rod shapes, the T-shaped rod is considered, highlighting how the th

A new type of slow-wave 1-D PBG microstr
A new type of slow-wave 1-D PBG microstrip structure without etching in the ground plane for filter and other applications
✍ Dusan Nesic 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 145 KB

## Abstract A new type of one‐dimensional (1D) photonic bandgap (PBG) microstrip slow‐wave structure applied for filter is presented. The proposed filter exhibits remarkable slow‐wave and low‐pass characteristics. It is formed without etching in the ground plane, only by modification of the microst