New conducting thermoplastic elastomers. I. Synthesis and chemical characterization
β Scribed by E. Carone; L. D'Ilario; A. Martinelli
- Publisher
- John Wiley and Sons
- Year
- 2001
- Tongue
- English
- Weight
- 216 KB
- Volume
- 83
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Poly(ether ester) block copolymers were prepared using a transesterification/ polycondensation bulk synthesis with systematic control of the terephthalic acid/butanediol aromatic diester block ('hard segment') and with poly(tetramethylene oxide) [PTMO], poly(hexamethylene oxide) [PHMO], or poly(deca
The synthesis and characterization of novel thermoplastic elastomers consisting of multiple polystyrene-b-polyisobutylene (PSt-b-PIB) arms emanating from cyclosiloxane cores is described. The synthesis involved the sequential living cationic block copolymerization of styrene (St) and isobutylene (IB
Thermoplastic polyurethane elastomers (TPUs) are generally synthesized by using the two-step, so-called prepolymer, method. To study the influence of the prepolymer on the properties of the final TPUs, four polyurethane prepolymers were prepared from a diisocyanate and a macroglycol by using differe
A new amphiphilic polymer i.e., polyethylene glycol (PEG) grafted crystalline neoprene, which was used as compatibilizer to improve the compatibility of elastomer and waterabsorbent resin, has been investigated. The synthesis was based on the reaction between chlorine in neoprene and sodium salts of