New concept for simplifying SOFC system
β Scribed by T. Hibino; K. Ushiki; Y. Kuwahara
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 438 KB
- Volume
- 91
- Category
- Article
- ISSN
- 0167-2738
No coin nor oath required. For personal study only.
β¦ Synopsis
A novel design for the solid oxide fuel cell (SOFC) has been proposed. By attaching palladium and gold electrodes on the same face of BaCe,,,Gd,,O,_, electrolyte and feeding a mixture of CH, and 0, (CH,:O, mole ratio = 2:l) to the cell at 95O"C, electric power could be generated from the cell. The main advantages are that the ohmic resistance of the cell decreased with reducing distance between the two electrodes and that some unit cells were connected in series and parallel with one another on the same electrolyte. In addition, the surface ionic conduction of oxide ion was studied from the standpoint of the surface morphology of the electrolyte.
π SIMILAR VOLUMES
## Abstract A new βeffective nucleiβ concept for a simplified approach to the analysis of batch crystallization with agglomeration is proposed. The new effectiveβnuclei concept comes from agglomeration characteristics observed experimentally in a batch crystallizer. Smallβsized crystals could combi
performance and efficiency, yet its volume has been reduced by 40%. It also now includes an electrical inverter, to convert DC to usable AC power, and operates at an AC gross electrical efficiency of 34% (lower heating value, LHV). The heat recovery efficiency has increased to 47% (LHV), for a tota
extensive insulation used in conventional SOFCs, and eliminates the need for catalysts. All these features indicate a reduced cost, and a positive future impact on the fuel cell market. The thin-film SOFCs are about 1 Β΅m thick with an output of 0.8-0.9 V; a 660 cm 3 stack would produce more than 5
## Abstract SOFC systems, working at high temperatures of about 800βΒ°C, have recently attracted significant interest for application as automotive and stationary power supply systems, based on gasoline or diesel heating. For periodically changing operation, the thermal management of the system, inc