𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Nanodipoles for an optical phased array

✍ Scribed by V. S. Zuev; G. Ya. Zueva


Publisher
Springer US
Year
2007
Tongue
English
Weight
409 KB
Volume
28
Category
Article
ISSN
1573-8760

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Optical waveguide components for beam fo
✍ D. R. Jez; K. J. Cearns; P. E. Jessop 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 120 KB 👁 1 views

A four-channel array of rf modulated laser signals was generated in a LiNbO optical wa¨eguide network by heterodyne mixing 3 of two input lightwa¨es. Independent control of the rf phase in each channel was pro¨ided by integrated optical phase shifters. An optical frequency shifter was demonstrated t

A flexible continuous beamformer with ti
✍ Jianliang Yang; Swee Chuan Tjin; Yunqi Liu; Nam Quoc Ngo 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 104 KB 👁 1 views

## Abstract A flexible continuous optical beamformer with time delay for a phased‐array antenna is proposed and demonstrated. It is constructed using a novel tunable chirped fiber grating achieved by bending a uniform grating, and a multi‐wavelength fiber laser based on a novel Sagnac interferemetr

An NMR Phased Array for Human Cardiac 31
✍ Christopher J. Hardy; Paul A. Bottomley; Ken W. Rohling; Peter B. Roemer 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 790 KB

## Abstract A four‐coil phased‐array ^31^P NMR receiver was designed and tested for human cardiac applications, to determine whether the combination of relatively high signal‐to‐noise ratio (SNR) and large field of view produced in ^1^H imaging is also realized for __in vivo__ ^31^P spectroscopy. S

Optimal phased-array combination for spe
✍ Mark Bydder; Gavin Hamilton; Takeshi Yokoo; Claude B. Sirlin 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 266 KB

A method for making weighted linear combinations of the spectra acquired by a phased-array coil is described. Unlike most previous combination methods, no special reference points in the data are chosen to represent the coil weights. Instead, all the data points are used, which results in optimal si