𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Multiwavelength fiber lasers based on multimode fiber Bragg gratings using offset launch technique

✍ Scribed by Xinhuan Feng; Hwa-yaw Tam; Weng-hong Chung; P.K.A. Wai


Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
240 KB
Volume
263
Category
Article
ISSN
0030-4018

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Reconfigurable multiwavelength erbium-do
✍ Jin-Hua Yan; Hong-Yan Fu; Sailing He πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 207 KB

## Abstract A reconfigurable multiwavelength erbium‐doped fiber laser, using two multimode fiber Bragg gratings (MFBGs), is presented. Two MFBGs in L‐band are cascaded to form two overlapping resonant cavities. Various configurations of four‐, three‐, or two‐wavelength lasing are demonstrated exper

Fiber laser based on 4-core Yb-doped fib
✍ A. S. Kurkov; V. M. Paramonov; E. M. Dianov; V. A. Isaev; G. A. Ivanov πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 205 KB

We have realized and studied the fiber laser based on 4-core Yb-doped fiber and multimode Bragg grating as the input reflector. The lasing efficiency slope of 55% was measured. An investigation of the output emission has shown that the far-field pattern constitutes an interference picture. That allo

Multimode fiber lasers based on Bragg gr
✍ A. S. Kurkov; D. A. Grukh; O. I. Medvedkov; V. M. Paramonov; E. M. Dianov; M. V. πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 121 KB

We have realized a set of multimode lasers based on a double-clad Yb-doped fiber and Bragg gratings written on a graded-index multimode fiber. Efficient laser operation in the spectral range of 1.03-1.09 ΞΌm has been observed. Spectral characteristics of the laser emission have been investigated.

Multiwavelength peak power equalized las
✍ G. Ning; P. Shum; S. Aditya; Y.D. Gong; L. Xia πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 464 KB

relocated from 1.86 to 1.97 GHz whilst the upper zero varies from 2.24 to 2.04 GHz. ## 3. MEASURED RESULTS To verify the proposed approach, a filter is designed at f 0 Ο­ 2 GHz with 3.5% FBW and R Ο­ 0.64 using the dimensions as reported in the last section. The substrate used is RO4003 with relativ